Nutone 9297T Instrukcja Użytkownika Pobierz pdf

IMPORTANT SAFETY INSTRUCTIONS

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOW-

ING:

1. All electrical work must be done in accordance with local and/

or national electrical code as applicable. For safety, this prod-

uct must be grounded. If you are unfamiliar with methods of

installing electrical wiring, secure the services of a qualified

electrician.

2. Turn off power at service entrance before installing, wiring or

servicing this product.

3. This product is designed for horizontal ceiling installation only.

Do not mount this product on a wall or sloped ceiling.

4. Do not install heater closer than 12" to any adjacent vertical

surface.

5. To avoid electrical shock:

• Do not install unit in a tub or shower enclosure.

• Never place a switch where it can be reached from a tub or

shower.

6. Provide heater with a separate 20 amp (minimum), 120 VAC

circuit.

7. Do not connect heater to dimmer switch or speed control.

8. To avoid motor bearing damage and noisy and/or unbalanced

impellers, keep drywall spray, construction dust, etc. off power

unit.

9. Please read specification label on product for further informa-

tion and requirements.

INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

Ceiling Heater

MODEL: 9297T

FIGURE 1

PLAN THE INSTALLATION

This heater is intended to be used to supply supplemental heat

from a ceiling location in new or existing construction.

Choose a location where edge of heater will be at least 12" from

any adjacent vertical surface.

The heater can be operated using an ON/OFF switch, timer (Model

VS62WH 60-Minute or Model VS63WH 15-Minute Timer). Pur-

chase the control separately.

Plan to supply the heater with proper line voltage and appropriate

power cable for its maximum wattage rating.

The heater attaches directly to a standard 3" or 4" ceiling electrical

box.

Refer to FIGURE 1

Follow these basic steps when installing this heater:

1. Mount electrical box in ceiling and attach power cable to it.

2. Connect wiring and fasten heater to electrical box.

3. Install grille.

CEILING JOIST

HEATER

GRILLE SCREW

DRYWALL

CEILING

ELECTRICAL

BOX

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Ceiling Heater

IMPORTANT SAFETY INSTRUCTIONSWARNING – TO REDUCE THE RISK OF FIRE, ELECTRICSHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOW-ING:1. All electrical work

Strona 2 - USE AND CARE

2FIGURE 4INSTALLATIONRefer to FIGURE 21. Mount electrical box. Position electrical box flush or slightlyrecessed in ceiling and mount it securely.Refe

Strona 3

3MHEATING ELEMENTBLACKBLACKGROUNDWHITEBLACKWHITEGROUNDWHITE120 VAC LINE INSWITCH BOXTOGGLE SWITCH, TIMER, OR THERMOSTATCEILING BOXTFIGURE 9FIGURE 8FIG

Strona 4 - PARTS LIST 9297T - R01

WARRANTYProduct specifications subject to change without notice.4820 Red Bank Road, Cincinnati, Ohio 45227Printed in U.S.A., 02/03, Part No. 99042869F

Strona 5 - Calentador de Cielo Raso

INSTRUCCIONES DE INSTALACIÓN¡LEA Y CONSERVE ESTAS INSTRUCCIONES!Calentador de Cielo RasoMODELO: 9297TINSTRUCCIONES DESEGURIDAD IMPORTANTESADVERTENCIA

Strona 6 - USO Y MANTENIMIENTO

6NEGRONEGROTIERRABLANCOLINEA DE ENTRADADE 120 VCA 60 HZALAMBRE VERDEO DESCUBIERTOTORNILLODE TIERRABLANCOTEMPORIZADORDE INTERRUPTORDE PALANCAACODILLADA

Strona 7

7MELEMENTO DE CALORNEGRONEGROTIERRABLANCONEGROBLANCOTIERRABLANCOLINEA DE ENTRADA 120 VAC 60 HZCAJA DEL INTERRUPTORTEMPORIZADOR DE INTERRUPTOR DE PALAN

Strona 8 - GARANTIA

Especificaciones de producto conforme a cambio sin el aviso.4820 Red Bank Road, Cincinnati, Ohio 45227Printed in U.S.A., 02/03, Part No. 99042869F9297

Komentarze do niniejszej Instrukcji

Brak uwag

Nutone 9297T Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt ogrodniczy Nutone 9297T. NuTone 9297T User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt ogrodniczy Nutone 9297T